The AI pilot impressed everyone in the demo, and its score made the next slide easy. At the budget meeting, someone asks whether it will work on next quarter’s data and whether the team can act on its predictions.
An AI pilot is a limited test of whether a proposed AI task can work with available data and fit a real decision process. For a production decision, its evidence should connect the inputs, evaluation population, comparison method, and prediction errors to the conditions in which people will use the result.
Key takeaways
- Define the decision and the information available when it is made before interpreting a pilot score.
- Check the evaluation population and positive-case count, especially when the event of interest is rare.
- Compare approaches under fixed conditions and translate errors into work, missed opportunities, and capacity.
- Keep the data, preparation details, and results sufficiently inspectable to repeat relevant checks as conditions change.
What should an AI pilot prove before production?
An AI pilot should show that its data and evaluation address the decision the business intends to make.
Start with an operational statement: who will use a prediction, when they will receive it, and what action they can take. A model that identifies a likely equipment failure after an incident can help classify historical records, for example, while an early-warning workflow needs readings available before the incident and enough lead time for maintenance.
The target and the evaluation set follow from that statement. Define what counts as a positive outcome, how labels are established, and which records resemble the people, transactions, or assets the model will encounter. CUBIG’s guide to an AI proof of concept explains how a limited test fits into a broader decision process.
A production proposal also needs a baseline. Compare the pilot with the current workflow or a simpler prediction method under conditions that make the differences interpretable. A model can be technically promising while its additional workload, missed cases, or data requirements make the proposed use impractical.
CUBIG Shorts
Why AI Pilots Stall on Real Data
A short take on the same point: a pilot that works on sample data can stall when it meets the data production will bring.
Why do AI pilots stall before production?
AI pilots stall when an encouraging demonstration leaves the operating decision unresolved.
The budget owner needs to understand the problem being solved, the expected workload, and the conditions under which the result was measured. In its 2024 report, RAND describes interview findings that include misunderstandings about the problem and a lack of the data needed to train an effective model. Those findings provide context for the handoff from demonstration to decision; they do not predict the outcome of a particular pilot.
A score may also conceal work that sits outside model training. Sources need definitions, labels need review, and data pipelines need owners. Sculley and colleagues’ 2015 paper describes how data dependencies contribute to technical debt in machine learning systems, while Google Research’s 2021 account of data cascades describes data issues that compound over ML development and surface downstream.
The practical result can be pilot purgatory: the team has a result worth discussing but lacks the evidence needed to commit resources. A clear report can separate issues that call for another test from issues that make the proposed use unsuitable.
Which data checks separate a pilot score from a production decision?
The essential checks connect the evaluation data and its errors to the proposed workflow.
| Pilot question | What to check | What goes wrong if skipped |
|---|---|---|
| Can the model make the decision on time? | Record when each input becomes available and exclude information created after the decision. | A strong result may depend on information unavailable in use. |
| Does the evaluation resemble real use? | Check the population, label definitions, class mix, and number of positive cases in the held-out records. | A score may reflect an artificial mix or move sharply with a few cases. |
| Is the comparison fair? | Hold evaluation records, model settings, and the prediction rule fixed when assessing a data change. | Differences in results may have several competing explanations. |
| Can the team act on the errors? | Report true positives, missed positives, and false alarms alongside the capacity and cost of acting. | A higher score may produce a workload the team cannot absorb. |
| Does the result repeat? | Test suitable splits, periods, sites, or an independent dataset, and record how results vary. | A result from one favorable sample may be mistaken for stable performance. |
The evaluation set should remain separate from the data used to fit the model and make data-dependent preparation choices. If a team uses evaluation results to choose features, tune thresholds, or select a model, it needs a further untouched evaluation for the final assessment.
Timing deserves particular attention. Kapoor and Narayanan’s 2023 analysis describes leakage as a widespread problem in ML-based science that has led to severe reproducibility failures. In a pilot, data leakage can arise when a field carries information from the outcome or when preparation learns from records intended for evaluation.
Class mix matters because an aggregate score can conceal the minority cases that motivate the project. CUBIG’s guide to class imbalance explains why teams should examine positive-case counts and the trade-off between missed cases and false alarms.
What do CUBIG’s experiments show about pilot evidence?
CUBIG’s experiments show that a similar headline improvement can support different conclusions depending on timing, sample size, and the task tested.
Bank Marketing: a score can use information that arrives too late
In CUBIG’s October 2026 Bank Marketing experiment, Random Forest F1 rose after preparation, while false alarms rose from 16 to 39 on the same 824 evaluation records. The comparison makes a real trade-off visible: more historical subscription records were identified, alongside more non-subscribers incorrectly flagged.
The inputs still included call duration. The UCI dataset documentation says duration is unknown before a call, so the experiment does not demonstrate pre-call targeting performance.
The comparison used a single evaluation split, and the exported files supported rerunning training and scoring from the prepared data. CUBIG’s October 2026 report also says the package did not establish that every learned preparation step was fitted using training data alone, so upstream leakage remains a question for further validation. Ranking metrics fell slightly, and the experiment did not compare a class-weight or threshold-adjusted baseline. A useful next test would remove duration and document the preparation process.
Wilt: a small positive count makes recall sensitive
In CUBIG’s October 2026 Wilt experiment, one internal evaluation split contained 868 image segments, including 15 positives. On that split, logistic regression found 15 positives after preparation instead of 1, while false positives rose from 2 to 9, according to the same report.
Each positive represented about 6.67 percentage points of recall in CUBIG’s October 2026 evaluation. That makes the observed recall sensitive to individual cases and gives a budget owner a reason to ask for more evidence before applying the result elsewhere.
CUBIG’s October 2026 report states that no McNemar p-value was below 0.05; the comparison is exploratory and makes no statistical significance claim. The separate official test file was not used, and repeated evaluation and independent imagery would help assess stability and transfer. The baseline already ranked cases well (ROC-AUC 0.9860), so a validation-selected threshold remains an untested alternative.
AI4I: classification is not an early-warning test
In CUBIG’s November 2026 AI4I analysis, the synthetic dataset had no timestamps or forecast window. The test classified failure labels from conditions in the same record; it did not measure whether a team could receive an alert before a failure.
On the same 2,000 held-out records containing 68 failures, CUBIG’s November 2026 LightGBM comparison found 56 failures after preparation instead of 49, while false alarms rose from 3 to 4. The result describes that split and its classification task, with no measured claim about performance in a real plant.
For an early-warning pilot, the next dataset needs timed readings, failure events, and a defined forecast window. A maintenance team also needs to agree on the failure label and the action available when an alert arrives.
How can a pilot comparison survive a budget meeting?
A comparison is easier to assess when the team can explain what changed, what stayed fixed, and what the errors mean for the proposed operation.
Write the decision rule before presenting the result. For an outreach pilot, specify when a list is generated, which fields are available then, and how many contacts the campaign can handle. For maintenance, specify the warning window and who investigates an alert.
Next, show the baseline and candidate on the same held-out records where the comparison calls for it. Keep relevant model settings and the prediction rule fixed when examining a preparation change. Document any differences that remain, including combined preparation steps that cannot be attributed separately.
Translate the confusion counts into a workload. Report how many actual positive cases were found, how many were missed, and how many negative cases were flagged. Ask the operational owner whether the false alarms fit available capacity and what a missed case means in that workflow.
Finally, show the boundary of the result. Name the population, period or split, known data limitations, and checks still needed. A decision can then be to proceed with a bounded rollout, fix and retest the pilot, or stop spending on the proposed approach.
What should a pilot report include before a production decision?
A pilot report should give decision-makers enough detail to inspect the result and identify the next test.
- Decision and timing: The intended action, decision point, forecast window where relevant, and inputs available at that point.
- Data and labels: Source, population, label definition, class mix, positive-case count, and known gaps or inconsistencies.
- Comparison: Baseline, candidate, preparation steps, model settings, prediction rule, and how evaluation records were held out.
- Results and capacity: Scores with their denominators, plus found cases, missed cases, false alarms, and the team’s ability to act.
- Limits and follow-up: Split or period coverage, outstanding leakage checks, repeatability results, and the evidence needed for the next decision.
The report should also identify the owner of each open question. A data owner may need to verify when a field is recorded; an operations owner may need to set an acceptable alert volume. The AI production readiness discussion provides a broader frame for the work around the model.
Where does CUBIG fit?
CUBIG helps teams prepare and check data for a specific AI task, with results that can be revisited when data or conditions change.
AI-ready data is prepared for the intended task, its results are checked, and relevant parts can be rechecked as conditions change. A useful preparation result therefore includes enough context to understand the target, the data used, and the checks behind the reported outcome.
Syntitan is CUBIG’s AI-ready data platform. It keeps the original Dataset unchanged and works on a copy, with preparation and validation results kept as Versions. Those Versions help a team connect a reported result to the data and checks it reviewed.
As of November 2026, Ready for Model compares built-in models before and after its own preparation on the same evaluation records for yes-or-no prediction on datasets of 100 to 10,000 rows. The comparison can expose changes in predictions and errors, while the team remains responsible for deciding whether its data, timing, and operating conditions support the intended use.
A pilot result remains bounded by the records and conditions tested, so a production decision may require further evaluation on data that reflects the intended workflow. Try it on your data in Syntitan: compare model results before and after preparation on the same evaluation records.
